Improved bio-hydrogen production by overexpression of glucose-6-phosphate dehydrogenase and FeFe hydrogenase in Clostridium acetobutylicum

Clostridium acetobutylicum is an attractive industrial microorganism for biochemical production, but there have been few attempts for bio-hydrogen production based on metabolic engineering. In this study, metabolically engineered C. acetobutylicum carrying glucose-6-phosphate dehydrogenase (zwf) and FeFe hydrogenase (hydA) were constructed as recombinant strains CA-zwf(pIMP-zwf) and CA-hydA(pMTL-hydA), respectively, to improve hydrogen productivity. The results showed that the engineered strains produced 1.15 and 1.39-fold higher hydrogen yield, respectively, than the wild type. Furthermore, when pH and glucose concentration were optimized for the CA-hydA strain, enhanced hydrogen productivity of 25.8% was achieved in 7 L jar scale fermentation. This result provides an insight into the future direction for metabolic engineering of C. acetobutylicum for improved hydrogen production.     

Silver-plated polyamide fabrics with high electromagnetic shielding effectiveness performance prepared by in situ reduction of polydopamine and chemical silvering

In this article, the silver-plated polyamide fabrics (SPPAFs) with high electroconductibility and shielding effectiveness were fabricated by using in situ reduction of polydopamine and chemical silvering. The effects of SPPAFs dopamine (C₈H₁₁O₂N) and silver nitrate (AgNO₃) concentration on surface resistivity and electromagnetic interference shielding effectiveness were studied. The results showed that the surface resistivity of SPPAFs can reach a minimum value of 0.06 ± 0.014 Ω cm⁻¹, when C₈H₁₁O₂N concentration is 4 g L⁻¹ and the AgNO₃ concentration is 120 g L⁻¹. The shielding effectiveness of SPPAFs in the wide frequency range of 10–3000 MHz increases with the increase in the concentration of AgNO₃, and increases first and stabilizes afterward with increasing C₈H₁₁O₂N concentration. When the concentration of C₈H₁₁O₂N and AgNO₃ is 3 and 120 g L⁻¹, respectively, mean shielding effectiveness values in the low-, medium-, and high-frequency bands are 71.3, 73.8, and 76.1 dB, respectively. Moreover, the mean shielding effectiveness values is 83.79 dB in the frequency range of 1.2–2.3 GHz. The dominant shielding mechanism of SPPAFs is the reflected electromagnetic waves and the absorption shielding effectiveness is less than 2 dB. The average electromagnetic shielding values of SPPAFs are above 67 dB after 16 weeks of storage, when C₈H₁₁O₂N concentration is 4 g L⁻¹ and the AgNO₃ concentration is 80 and 100 g L⁻¹. The prepared SPPAFs show promising applications in military textiles and smart wearable clothing. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48227.     

基于艾默生DeltaV R6新功能块的设备控制模块开发

利用艾默生控制系统旧版本软件,开发开关量设备控制模块比较繁琐,需要借助大量的逻辑功能块与条件判断功能块进行辅助开发,程序结构复杂,逻辑不清晰,容易出错。新版本软件推出的新功能块解决了以上问题。以某火法铜冶炼工程为例,结合冶炼工艺特点,程序开发过程中通过解决不熟悉新功能块特点应用难问题,风机、泵、电动阀等设备控制模块开发难问题,开发出了满足控制要求的各种设备控制模块。利用新版本软件的新功能块,开发的设备控制模块在火法铜冶炼得到成功应用。     

Tumor Necrosis Factor α and Interleukin-1β Acutely Inhibit AgRP Neurons in the Arcuate Nucleus of the Hypothalamus

Obesity-associated low-grade inflammation favors weight gain, whereas systemic infection frequently leads to anorexia. Thus, inflammatory signals can either induce positive or negative energy balance. In this study, we used whole-cell patch-clamp to investigate the acute effects of three important proinflammatory cytokines, tumor necrosis factor α (TNF-α), interleukin-6, and interleukin-1β (IL-1β) on the membrane excitability of agouti-related peptide (AgRP)- or proopiomelanocortin (POMC)-producing neurons. We found that both TNF-α and IL-1β acutely inhibited the activity of 35–42% of AgRP-producing neurons, whereas very few POMC neurons were depolarized by TNF-α. Interleukin-6 induced no acute changes in the activity of AgRP or POMC neurons. Our findings indicate that the effect of TNF-α and IL-1β, especially on the activity of AgRP-producing neurons, may contribute to inflammation-induced anorexia observed during acute inflammatory conditions.     

Small-Molecule Inhibitors of METTL3, the Major Human Epitranscriptomic Writer

The RNA methylase METTL3 catalyzes the transfer of a methyl group from the cofactor S-adenosyl-L-methionine (SAM) to the N⁶ atom of adenine. We have screened a library of 4000 analogues and derivatives of the adenosine moiety of SAM by high-throughput docking into METTL3. Two series of adenine derivatives were identified in silico, and the binding mode of six of the predicted inhibitors was validated by protein crystallography. Two compounds, one for each series, show good ligand efficiency. We propose a route for their further development into potent and selective inhibitors of METTL3.     

The analysis for morphological evolution and crystallography of degenerate pearlite in 100Mn13 steel

During approximate 773 K aging treatment of 100Mn13 steel, degenerate pearlite will occur and evolve into lamellar pearlite during growth process. The microstructures of degenerate pearlite and its evolutionary lamellar pearlite are observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that after 748 K, 773 K and 798 K aging, degenerate pearlites occur at grain boundary. At growth front of degenerate pearlite forming at 773 K and 798 K, pearlite presents a morphology of short lamellae of carbide and ferrite, indicating a trend of developing into lamellar pearlite. The higher the temperature is, the more obvious the trend is, and even a conventional lamellar pearlite has developed. However, there is no morphological evolution for degenerate pearlite forming at 748 K aging. Besides, the constituents of degenerate pearlite is identified as M₂₃C₆ and ferrite, and Kurdjumov-Sachs orientation relationship exists between them, (01 )_α//( 1 )_M23C6, [111]_α//[110]_M23C6. This orientation relationship maintains in morphological evolution from degenerate pearlite to lamellar pearlite.     

基于IEC60076-15的SF6气体绝缘变压器的特殊性

对IEC60076-15《充气式电力变压器》中关于气体绝缘变压器的特殊要求进行了解读,同时对标准中没有提到的SF6气体绝缘变压器的相关问题进行了说明。     

氟锆酸钾盐混合物对Mg-3Y-3.5Sm-2Zn合金组织和性能的影响

制备了三种氟锆酸钾(K2ZrF6)盐混合物(M),分别在三个温度下将三种盐混合物加入到铸态Mg-3Y-3.5Sm-2Zn合金中。通过差热分析(DSC),X射线衍射(XRD),光学显微镜(OM),扫描电子显微镜(SEM),能量色散谱(EDS)和拉伸试验研究了合金的显微组织和力学性能,讨论了K2ZrF6盐混合物在合金中的晶粒细化机理。结果表明,铸态Mg-3Y-3.5Sm-2Zn合金由α-Mg,Mg12(Y,Sm)Zn 和 (Mg,Zn)3(Y,Sm)三种相组成。SEM和XRD检测发现,添加K2ZrF6盐混合物不会在合金中产生新的相。在780°C下加入M3盐(60wt% K2ZrF6-20wt% NaCl-20wt% KCl)时,合金的晶粒细化效果最佳。通过在780℃下加入三种盐,铸态Mg-3Y-3.5Sm-2Zn合金的力学性能得到提高,由M3盐细化后的合金具有最佳的力学性能。K2ZrF6盐混合物可细化铸态Mg-3Y-3.5Sm-2Zn合金,这是由于Mg和K2ZrF6之间还原反应得到的细Zr质点和富锆区在合金中起到的晶粒细化作用。     

双时效对Ti-4Al-5Mo-6Cr-5V-1Nb合金显微组织和力学性能的影响

研究了固溶、固溶后单时效以及固溶后双时效处理对Ti-4Al-5Mo-6Cr-5V-1Nb合金组织和力学性能的影响。结果表明,820℃下固溶0.5 h后,合金中的α相完全溶解;单/双时效合金的硬度均随时效时间增加先升高后降低;合金经300℃/8 h+500℃/8 h双时效处理后可达到4580 MPa的峰值硬度(HV),1462 MPa抗拉强度以及3.4%延伸率,其强度比原始合金高6%,也高于单时效合金。界面能计算结果表明ω相使α相形核的阻力降低50%,促进了α相的析出并细化α板条,从而提升合金的硬度,强度及塑性。     

18CrNiMo7-6环类锻件中白点缺陷的超声检测研究

将超声检测结果和缺陷波形特点进行分类和总结,并通过酸浸检验和断口检验对缺陷性质做出定性判断,验证了超声检测波形特征和白点缺陷的关联性,为通过超声检测手段来监控产品中是否存在白点缺陷提供参考。